solar pile drivers
tonker 830

GENERAL DESCRIPTION
Production of the Tonker 830 is done in a standard model, but according to customer requests, custom solutions can be provided with columns of different heights (to support the hammer hammer) ranging from 4,500 to 5,500 mm.
Furthermore, thanks to the clamp extractor that can be supplied by the machine manufacturer at the specific request of the buyer, it is possible to extract the posts from the ground even after hitting and without resorting to additional devices. The Pile Driver Tonker 830 is a multipurpose machine, designed and manufactured specifically for mortising metal posts and steel cross-section profiles in different types of soil.
The Tonker 830 is mainly used for the construction of photovoltaic solar plants and, Thanks to its many functions with which it is equipped, it can be used in various configurations, such as screwing, ramming, auger drilling for loose consistency floors and rotary drilling in high-density floors.
The machine is equipped With crawler frame and advanced tamping systems (hydraulic percussion hammer) and drilling (rotary head) that makes it particularly suitable both for moving on unstable and / or uneven terrain and for working on various types of soil.
All The parts of the Tonker 830 are assembled in a strong steel frame that guarantees a high balance in terms of distribution. ion weight and in the operational phase. In general, the entire design of the machine has been carried out to promote stability both during movement and during hitting and / or drilling operations.


DATA SHEET
TOTAL WEIGHT: 4000 kg
MAXIMUM SPEED: 4.5 km / h
MAXIMUM PITCH HEIGHT: 510mm
HYDRAULIC OIL TANK CAPACITY: 180 lt
ENGINE OIL TANK CAPACITY: 5 lt
FUEL TANK CAPACITY: 55 lt
PUMP MODEL: PUMP TUROLLA GROUP 3 IN CAST IRON
PUMP MOTOR CAPACITY: 34 cc
OPERATIONAL PRESSURE: 220 bar
MANUFACTURER: INDECO SPA
IMPACT FORCE: 950 – 1200 joules
WEIGHT: 185 kg
WEIGHT UNDER WORKING CONDITION: 350 – 550 kg
BLOWS PER MINUTE: 620/1500 – 580/1180
OIL FLOW: 60 / 90 – 60/90
HAMMER PRESSURE: 180 bar
INTERNAL COMBUSTION ENGINE: YANMAR – TIER 3
ENGINE DISPLACEMENT: 2200 cc
POWER AT 3000 RPM: 40 kW
POWER (kW): MIN 18 – MAX 35.4
SPEED: 3,000 RPM
With specific accessories supplied by the manufacturer, it is possible to remove the poles.
Any other use will void any warranty.
The machine must be used without modification.
You must not use the machine in a potentially explosive environment.
You must not use the machine with equipment not approved by the manufacturer.
You must not use the machine to transporting people.
You should not use the machine to lift people to different heights with the hammer.
You should not use the machine with the column tilted to insert or remove posts.
Movement on public streets it is prohibited as the machine is not
approved for street driving.
While working on public streets, be sure to use proper signage around the work area.
MAIN ELEMENTS
COLUMN WITH HEADLIGHT
The column is used as a guide to place the hammer in the correct position in relation to the pile that will be rammed into the ground.
TOOL BOX
FUEL & HYDRAULIC OIL TANKS
These supply the internal combustion engine and the hydraulic system of the machine
HEAT EXCHANGE
It allows to dissipate the excessive heat of the hydraulic oil
HAMMER
It is available in 2 variants with power of 950 or 1200 Joule, which produce from 620 to 1500 strokes per minute.
CROSS COLUMN
It contains the device for the transverse movement of the column
BEATING MASS
Makes it possible to quickly impose piles of any shape both in wood and steel, with a diameter up to 300 mm.
The design of each beating mass can be carried out at the request of the client based on the type of pole that must be inserted.
INTERNAL COMBUSTION ENGINE
It supplies energy to the hydraulic components of the machine
CATERPILLAR GEAR MOTOR
It transmits the movement to the crawler car
FOOTBOARD
This component is the positioning plan for the operator to drive the machine with good standards of comfort and safety.
PERCUSSION HYDRAULIC HAMMER
It allows to ramming the steel pile into the ground
CLAMP EXTRACTOR
Through this device is possible to apply a force up to 6,000 kg in extraction tests. (Attachment available upon customer request, it is not included in the price of the machine).
download documents
advantageous purchase
change your used for a new one?
USED MACHINES

Coming soon

coming soon
Contacts
+39 342 328 8440 (only Whatsapp messages)
ADDRESS
TeaTek Group Holding
Via Del Grande Archivio, 32
80138 - NAPOLI
ITALY
tonker@teatekgroup.com
TAX CODE
P.IVA 09829131219
WORKING HOURS
MON: 9am - 5pm
TUE: 9am - 5pm
WED: 9am - 5pm
THU: 9am - 5pm
FRI: 9am - 5pm
SAT: 9am - 5pm
SUN: CLOSED